 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FAN5646 -- Programmable Indicator "Soft" LED Blinker with TinyWireTM Interface August 2009 FAN5646 Programmable Indicator "Soft" LED Blinker with TinyWireTM Single-Wire Interface Features LED "Soft" Blink: with Logarithmic Fade Up and Fade Down for Power Savings Follow or Repeat Pattern Mode for Blinking when Applications Processor is Powered Down Default Pattern Optionally Modified using TinyWireTM Single-Wire Digital Control for: - LED Current Rise / Fall Time - tON and tOFF for Up to Two Pulses High-Side Constant Current LED Driver: - 20mA Maximum Output Current - 80mV Drop-out at 20mA IOUT - External RSET (SC70 only) or Internal Current Programming 35A Operating Quiescent Current Short-Circuit, Under-Voltage, and Thermal Protections Wide Input Range: 2.7 to 5.5V 4-Bump WLCSP, 0.4mm pitch or 5-Lead SC70 (EIAJ SC88) Description The FAN5646 is a flexible and compact solution for a blinking or "breathing" LED indicator. The internal programmable blink algorithm eliminates any need for continual system processor control. This means longer battery life for a hand-held system because the system processor is not awakened from sleep mode to blink an LED. Very low dropout of 80mV allows driving an LED without any inductors or switch capacitors. LED blink rate, rise and fall time, and CTRL line behavior can be programmed by a TinyWireTM single-wire digital interface. The on-time and time between pulses can be set for up to two different pulse widths. The default for FAN5646 option 01 is "follow" mode, where the LED turns on with the programmed rise time, then stays on as long as CTRL remains HIGH. When CTRL falls, the LED turns off at the programmed fall time. For option 00; when CTRL is HIGH continuously, the LED repeats the programmed pattern. The FAN5646 is available in a four-pin wafer-level chip-scale package with 0.4mm pitch or a five-lead SC70 package. Applications Cell Phone Pocket PCs and Digital Cameras Bluetooth Headsets PMP and MP3 players (R) Figure 1. Typical Application Ordering Information Part Number FAN5646UC00X FAN5646S700X FAN5646UC01X FAN5646S701X Option 00 00 01 01 Follow Bit Default 0 0 1 1 Temperature Range -40 to 85C -40 to 85C -40 to 85C -40 to 85C Eco Status Green Green Green Green Package WLCSP-4, 0.4mm Pitch 5-Lead SC70, EIAJ SC88 WLCSP-4, 0.4mm Pitch 5-Lead SC70, EIAJ SC88 Packing Tape and Reel Tape and Reel Tape and Reel Tape and Reel For Fairchild's definition of "green" Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. Bluetooth(R) is a registered trademark of Bluetooth SIG, Inc. Important: Contact a Fairchild Semiconductor sales representative for additional performance information and specifications. (c) 2009 Fairchild Semiconductor Corporation FAN5646 * Rev. 1.0.1 www.fairchildsemi.com FAN5646 -- Programmable Indicator "Soft" LED Blinker with TinyWireTM Interface (c) 2009 Fairchild Semiconductor Corporation FAN5646 * Rev. 1.0.1 www.fairchildsemi.com 13 |
Price & Availability of FAN5646UC01X
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |